Page 1 of 2 12 LastLast
Results 1 to 30 of 39
  1. #1
    Bustin Slobs Cbow's Avatar
    Join Date
    Sep 2013
    Location
    Russellville, AR
    Posts
    1,248

    As Promised, Seelites' NEW 80w HD True Warm Line

    After a ton of work and R&D, we are finally ready to release these lights to you guys! Introducing a new, all in one, 80w fixture from Seelite. We have built the driver into the housing, so there is no annoying driver boxes hanging off the back of the light. What does this mean? Less places for water intrusion, and low profile mounting options. Here are the specs:

    SeeLite 80W HD True Warm Light
    -80w power (2 40w LED chips)
    -9.5"x11x5"x3.5" (same size as 50w but thinner)
    -Seelite's one of a kind custom chip set (8000 lumens)
    -6.6 amps @ 12v, 3.3 amps @ 24v, and .66amps and 120v
    -offered in HPS, Halo, and MH color options
    -unmatched completely sealed units
    -all stainless bolts enter from backside for clean look
    -heavier brackets
    -same no questions asked 1 year warranty







    These are ready for order, but will have a lead time on them for time being. We have several ordered for stock, but as with anything new it takes time. Lead time on these lights is 3 weeks right now, but hope to change that very soon! As a promotion for BFZ members we are offering a 20% discount on these lights. I will post promotional code within a day or two. Enjoy!
    TEAM NASTY HABITS
    >>--AIM SMALL--MISS SMALL--->

  2. #2
    HERRO???? relentless's Avatar
    Join Date
    Sep 2013
    Location
    Nebraska
    Posts
    1,506
    Just took it to a different level with leds

  3. #3
    Self Proclaimed WC Greenway's Avatar
    Join Date
    Sep 2013
    Location
    Paron Arkansas
    Posts
    2,409
    Sweet. I may just need a set for mine

    BAA MEMBER BOA PRESIDENT
    BAA ARKANSAS STATE REP.
    18/8 ALUMITECH
    TEAM SEELITE

  4. #4
    team bloody decks Delawareriver's Avatar
    Join Date
    Sep 2013
    Location
    pa/nj
    Posts
    2,173
    Looks good!
    It aint a good night till your deck gets bloody!

  5. #5
    Bustin Slobs bpreston's Avatar
    Join Date
    Sep 2013
    Posts
    1,518
    What's the retail on these?

  6. #6
    CBK Joel's Avatar
    Join Date
    Sep 2013
    Location
    San Antonio
    Posts
    247
    nice, price?
    CALM BEFORE THE KILL T.V.
    QUICK DRAW PRO STAFF
    BACKWOODS ARCHERY PRO STAFF
    TBA/BAA

  7. #7
    I got shafted! fullbore's Avatar
    Join Date
    Sep 2013
    Location
    Independence, IA
    Posts
    326
    Is the bracket the same size? Or do I have to expand my parts selection? They look sweet though
    Team Fullbore Bowfishing
    Reaper crew

  8. #8
    I got shafted! BowfishAZ's Avatar
    Join Date
    Sep 2013
    Location
    Arizona
    Posts
    462
    Looks good man. I might have to give them a try for next season.

  9. #9
    Bustin Slobs Cbow's Avatar
    Join Date
    Sep 2013
    Location
    Russellville, AR
    Posts
    1,248
    Quote Originally Posted by fullbore View Post
    Is the bracket the same size? Or do I have to expand my parts selection? They look sweet though
    Brackets are about an inch wider
    TEAM NASTY HABITS
    >>--AIM SMALL--MISS SMALL--->

  10. #10
    Bustin Slobs Cbow's Avatar
    Join Date
    Sep 2013
    Location
    Russellville, AR
    Posts
    1,248
    Quote Originally Posted by bpreston View Post
    What's the retail on these?
    getting these added to website and price will be announced.
    TEAM NASTY HABITS
    >>--AIM SMALL--MISS SMALL--->

  11. #11
    I got shafted! matt's Avatar
    Join Date
    Sep 2013
    Location
    WKY
    Posts
    175
    Now we are getting closer to something I might consider swapping to. Cant wait to see these on the water.
    TEAM SHESMADAGAIN

    Backwater Outdoors Pro-Staff

  12. #12
    I got shafted! Hit N Miss's Avatar
    Join Date
    Sep 2013
    Location
    Southern Indiana
    Posts
    26
    How much do theses weigh compared to the 50's?
    Codey Kelly
    Team Hit N Miss

  13. #13
    "You're no Daisy" IMPALED's Avatar
    Join Date
    Sep 2013
    Location
    Lower Mississippi River Basin...
    Posts
    972
    Quote Originally Posted by matt View Post
    Now we are getting closer to something I might consider swapping to. Cant wait to see these on the water.

    Right there with ya man...

    If these do what they think they will do, I may be moving my HPS lights from the boat to the shop! LOL
    Mr. D's Fried Chicken
    Bunche's Fades & Braids
    The Source Clothing Store
    Middleton's Black and Mild Cigars

  14. #14
    "You're no Daisy" IMPALED's Avatar
    Join Date
    Sep 2013
    Location
    Lower Mississippi River Basin...
    Posts
    972
    still keeping a generator on board tho... haha
    Mr. D's Fried Chicken
    Bunche's Fades & Braids
    The Source Clothing Store
    Middleton's Black and Mild Cigars

  15. #15
    I got shafted! matt's Avatar
    Join Date
    Sep 2013
    Location
    WKY
    Posts
    175
    Quote Originally Posted by IMPALED View Post
    still keeping a generator on board tho... haha
    HAHA I hear ya.. I just cant talk myself into walking away from my 250HPS. Ive shot over the 50s and for me they just dont cut it. BUT sounds like the 80s could be close..
    TEAM SHESMADAGAIN

    Backwater Outdoors Pro-Staff

  16. #16
    HERRO???? relentless's Avatar
    Join Date
    Sep 2013
    Location
    Nebraska
    Posts
    1,506
    Quote Originally Posted by matt View Post
    HAHA I hear ya.. I just cant talk myself into walking away from my 250HPS. Ive shot over the 50s and for me they just dont cut it. BUT sounds like the 80s could be close..
    I am in the same boat with you too we shall see but it does sound promising

  17. #17
    I got shafted! clint's Avatar
    Join Date
    Sep 2013
    Location
    L.A. (Lower Arkansas)
    Posts
    437
    looking forward to this. think this might be what i've been waiting for. let us know when the pricing will be posted. got some mh i might be selling!

  18. #18
    "You're no Daisy" IMPALED's Avatar
    Join Date
    Sep 2013
    Location
    Lower Mississippi River Basin...
    Posts
    972
    Well, I know the H.O. alternator and an extra battery or two works, Ive seen too many rigs make it through several all nighters to say otherwise...

    However, I personally would rather have my lights running off of an EU1000 or 2000 just for the fact that my two main most important things will be separated. If lights go down then I can still make it back to the ramp. If the engine goes down I will still be able to shoot minnows until someone comes along to drag my junky boat back to the ramp...

    Im Just waiting on the hps color LED that can compare to my 400's I figure I have around 180 pounds of lights plus a 130 pound generator, so If I could cut my lighting weight in half without sacraficing too much light output then it would be an improvement...
    Mr. D's Fried Chicken
    Bunche's Fades & Braids
    The Source Clothing Store
    Middleton's Black and Mild Cigars

  19. #19
    I got shafted! JBurns's Avatar
    Join Date
    Sep 2013
    Posts
    68
    That's awesome, I really like my 50's now. I'm excited to see the reviews on these new lights!
    -2014 Backwater Outdoors ProStaff
    www.backwateroutdoors.com
    -Brute Outoors ProStaff

  20. #20
    Till the day i Die Bad Company's Avatar
    Join Date
    Sep 2013
    Location
    Region 2
    Posts
    773
    seelite!!!

  21. #21
    I got shafted! clint's Avatar
    Join Date
    Sep 2013
    Location
    L.A. (Lower Arkansas)
    Posts
    437
    Prolly a good idea with the generator. A suitcase generator will handle everything and not putting all your eggs in one basket either. Makes good sense dude. I've went from a 5500 down to a 2600 genny so maybe we can get to a 1000! Be nice for sure.

  22. #22
    Bustin Slobs garpwacker's Avatar
    Join Date
    Sep 2013
    Location
    Smack dab in middle of DelMarVa
    Posts
    1,958
    How about 100 watt with (2). 50 watt chips ...is already being done by others. As well as 150 watt with 3 chips

  23. #23
    Bustin Slobs Cbow's Avatar
    Join Date
    Sep 2013
    Location
    Russellville, AR
    Posts
    1,248
    Quote Originally Posted by garpwacker View Post
    How about 100 watt with (2). 50 watt chips ...is already being done by others. As well as 150 watt with 3 chips
    the housings get way too big! 50w housings are not enough to cool 100w worth of light. Also, we are trying to find a happy medium in getting lots of light but without draining batteries in a few hours. You start getting up into 100w and 150w lights, they will be huge and not effeciant. We had to improve the cooling coils on this 80 trmendously to keep them cool. LOTS of work was done on these lights to make the reliable.
    TEAM NASTY HABITS
    >>--AIM SMALL--MISS SMALL--->

  24. #24
    Till the day i Die Bad Company's Avatar
    Join Date
    Sep 2013
    Location
    Region 2
    Posts
    773
    Quote Originally Posted by Cbow View Post
    the housings get way too big! 50w housings are not enough to cool 100w worth of light. Also, we are trying to find a happy medium in getting lots of light but without draining batteries in a few hours. You start getting up into 100w and 150w lights, they will be huge and not effeciant. We had to improve the cooling coils on this 80 trmendously to keep them cool. LOTS of work was done on these lights to make the reliable.
    heck yea im excited to see a light in the 5 digit lumen range in the future!

  25. #25
    Bustin Slobs garpwacker's Avatar
    Join Date
    Sep 2013
    Location
    Smack dab in middle of DelMarVa
    Posts
    1,958
    100-150 watt would be 120 v , that would eliminate the battery drain. I agree there is a limit to what you'll push with batteries .

  26. #26
    Bustin Slobs Cbow's Avatar
    Join Date
    Sep 2013
    Location
    Russellville, AR
    Posts
    1,248
    I can work on some 100w-150w fixtures if enough people want them. I'm sure it's hard to understand just how much work we have to put into a light to make it Bowfishing ready by SeeLite standards! There are a few others selling right now that just buy what they sell online and I can assure you, they won't cut the mustard or hold up. Chinese will cut every corner they can to make a penny. As I stated the bigger wattage lights require much bigger fixtures. Most people want to see them smaller....that's why we haven't put our time and resources into that large of a fixture yet
    TEAM NASTY HABITS
    >>--AIM SMALL--MISS SMALL--->

  27. #27
    I got shafted! BEAVER's Avatar
    Join Date
    Oct 2013
    Location
    Pittsville, WI
    Posts
    412
    Nice work Caleb!

  28. #28
    "You're no Daisy" IMPALED's Avatar
    Join Date
    Sep 2013
    Location
    Lower Mississippi River Basin...
    Posts
    972
    as in How big and how heavy would a 100 watt LED be?
    Mr. D's Fried Chicken
    Bunche's Fades & Braids
    The Source Clothing Store
    Middleton's Black and Mild Cigars

  29. #29
    I got shafted! Hit N Miss's Avatar
    Join Date
    Sep 2013
    Location
    Southern Indiana
    Posts
    26
    Is there a set price yet?
    Codey Kelly
    Team Hit N Miss

  30. #30
    j-mod#4 g-devil's Avatar
    Join Date
    Sep 2013
    Location
    The TN River
    Posts
    761
    any new news??
    U gonna do somthin', or just stand there and bleed?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •